Lldp; Lldp Global Settings - D-Link DES-3528 - xStack Switch - Stackable Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Sub-ring R-APS VLAN
State
TC Propagation State
Click the Apply button to implement the changes made.
Click the <<Back button to go back to the previous page.

LLDP

LLDP Global Settings

On this page the user can configure the LLDP global parameters.
To view the following window, click L2 Features > LLDP > LLDP Global Settings, as shown below:
The fields that can be configured are described below:
Figure 4-83 ERPS Sub-ring Settings window
Description
Enter the VLAN ID of a sub-ring connected to another ring.
Tick the check box and select Add or Delete from the drop-down menu to add or
remove the sub-ring to this ring.
Tick the check box and use the drop-down menu to enable or disable the propagation
state of topology change for the sub-ring. When Enabled, the switch will flush the FDB
when the topology changes.
Figure 4-84 LLDP Global Settings window
130