D-Link DES-3528 - xStack Switch - Stackable Reference Manual page 313

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Link Event
Link Monitor
Critical Link Event
Threshold
(0-4294967295)
Window
(1000-60000)
Notify
Click the Apply button to implement changes made.
Figure 10-15 Ethernet OAM Configuration Settings window
Description
Select the unit to configure.
Select a range of ports to be configured.
Configure the Ethernet OAM link event. Specify Link Monitor or Critical Link Event.
Link Monitor - Indicate that the OAM entity can send and receive Event Notification
OAMPDUs.
Critical Link Event - Configure the Ethernet OAM critical link event.
Use the drop-down menu to select various types of link monitoring.
Use the drop-down menu to select the critical link event between Dying Gasp and
Critical Event.
Specify the number of error frame per second in the period that is required to be equal
to or greater than the value of the special threshold in order for the event to be
generated. The default value of threshold is 1 error frame per second.
Specify the period of error frame summary events. The range is from 1000ms to
60000ms and the default value is 1000 ms.
Specify to Enable or Disable the event notification. The default state is Enabled.
304