D-Link DES-3528 - xStack Switch - Stackable Reference Manual page 303

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
SenderID TLV
Click the Apply button to accept the changes made for each individual section.
Click the Edit button to configure the MIP Creation and SenderID TLV of the specific entry.
Click the Apply button in the table to apply the changes to the specific entry.
Click the Delete button to remove the specific entry.
Click the Add MA button to configure the CFM MA settings.
Click the Add MA button to see the following window.
The fields that can be configured are described below:
Parameter
MA (Max: 22 characters)
VID (1-4094)
MIP
SenderID
CCM
None – No MIPs will be created. This is the default value.
Auto – MIPs are created when the next lower active MD-level on the port is reached or
there are no lower active MD levels.
Explicit – MIPs are created when the next lower active MD-level on the port is reached.
Used to define the TLV data types of the maintenance domain. The user can choose
between None, Chassis, Manage or Chassis Manage.
Figure 10-2 CFM MA Settings window
Description
Enter the CFM maintenance association (MA) name.
Enter a VLAN ID for CFM MA.
Use the drop-down menu to select the control creation of MIP.
None - Do not create MIPs.
Defer - Inherit the setting configured for the maintenance domain that this MA is
associated with. This is the default value.
Auto - MIPs can always be created on any port in this MA, if that port is not configured
with an MEP of that MA.
Explicit - MIP can be created on ports which has an existing lower level MEP
configured on it, and that port is not configured with an MEP of this MA.
Use the drop-down menu to select the control transmission of the sender ID TLV.
None - Do not transmit the sender ID TLV.
Chassis - Transmit the sender ID TLV with the chassis ID information.
Manage - Transmit the sender ID TLV with the manage address information.
Chassis Manage - Transmit the sender ID TLV with the chassis ID information and the
manage address information.
Defer - Inherit the setting configured for the maintenance domain that this MA is
associated with. This is the default value.
Use the drop-down menu to select CCM interval. The available choices are 10ms,
100ms, 1sec, 10sec, 1min and 10min.
294