Port Error Disabled - D-Link DES-3528 - xStack Switch - Stackable Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Medium Type
Description
Click the Apply button to implement changes made.

Port Error Disabled

The following window displays the information about ports that have been disconnected by the Switch when a packet
storm occurs or a loop was detected.
To view the following window, click System Configuration > Port Configuration > Port Error Disabled, as shown
below:
Figure 2-4 Port Description Settings window
Description
Select the unit to configure.
Select the appropriate port range used for the configuration here.
Specify the medium type for the selected ports. If configuring the Combo ports, the Medium
Type defines the type of transport medium to be used, whether Copper or Fiber.
Users may then enter a description for the chosen port(s).
Figure 2-5 Port Error Disabled window
11