Mld Multicast Group Profile Settings - D-Link DES-3528 - xStack Switch - Stackable Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide
Click the <<Back button to discard the changes made and return to the previous page.
After clicking the Profile List
Figure 4-69 IGMP Snooping Multicast VLAN Group List Settings window
The fields that can be configured are described below:
Parameter
VID
VLAN Name
Profile Name
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.
Click the Show IGMP Snooping Multicast VLAN Entries

MLD Multicast Group Profile Settings

Users can add, delete, or configure the MLD multicast group profile on this page.
To view the following window, click L2 Features > L2 Multicast Control > Multicast VLAN > MLD Multicast Group
Profile Settings, as shown below:
The fields that can be configured are described below:
Parameter
Profile Name
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the View All button to display all the existing entries.
Click the Group List link to configure the Multicast Group Profile Multicast Address Settings for the specific entry.
link, the following page will appear:
Description
Display the VLAN ID.
Display the VLAN name.
Use the drop-down menu to select the IGMP Snooping Multicast VLAN Group Profile name.
Figure 4-70 MLD Multicast Group Profile Settings window
Description
Enter the MLD Multicast Group Profile name.
link to view the IGMP Snooping Multicast VLAN Settings.
120