Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 43

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Table 18: Interfaces Configuration Fields (continued)
Option
Input Traffic Control Profile
Remaining
Output Traffic Control Profile
Output Traffic Control Profile
Remaining
Configuring CoS Classifiers (NSM Procedure) on page 15
Configuring CoS Code Point Aliases (NSM Procedure) on page 17
Configuring CoS Drop Profile (NSM Procedure) on page 19
Configuring CoS Forwarding Classes (NSM Procedure) on page 21
Configuring CoS Rewrite Rules (NSM Procedure) on page 28
Configuring CoS Schedulers (NSM Procedure) on page 31
Chapter 3: Configuring Class of Service
Function
Applies an input traffic
scheduling and shaping profile
for remaining traffic to the
logical interface.
Applies an output traffic
scheduling and shaping profile
to the logical interface.
Applies an output traffic
scheduling and shaping profile
for remaining traffic to the
logical interface.
Your Action
1. Expand the Interfaces tree
and select Interface Set.
2. Click the New button or
select an interface set and
click the Edit button.
3. Expand interface—set tree
and select Input Traffic
Control Profile Remaining .
4. Specify the comment and
profile name.
5. Click Ok.
1. Expand the Interfaces tree
and select Interface Set.
2. Click the New button or
select an interface set and
click the Edit button.
3. Expand interface—set tree
and select Output Traffic
Control Profile .
4. Specify the comment and
profile name.
5. Click Ok.
1. Expand the Interfaces tree
and select Interface Set.
2. Click the New button or
select an interface set and
click the Edit button.
3. Expand interface—set tree
and select Output Traffic
.
Control Profile Remaining
4. Specify the comment and
profile name.
5. Click Ok.
27