Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 154

Table 80: Configuring Traceoptions Fields
Option Function
Comment Specifies the comment
for the tracing
configuration.
No Remote Trace Specify whether or not
this tracing
configuration is written
on the remote host.
JUNOS Software
supports system-wide
remote tracing, by
which traces are
written to files on the
remote host To
override the
system-wide remote
tracing configuration
for a particular process,
When the No Remote
Trace check box is
enabled, the process
does local tracing.
File Specifies the limits on
the number and size of
trace files.
138
Your Action
Enter a comment.
Select the No Remote Trace check box to force local tracing for this
configuration.
1. Expand the Traceoptions tree and select File.
2. Configure the following to create and define a tracing file entry:
Comment—Enter a comment for the tracing file.
Size—Specify the size limit for the trace file.
Files—Specify the maximum trace file versions to be created.
Access—Specify access permissions for the tracing file:
None
world-readable—Allows any user to read all log files.
no-world-readable—Allows log files to be accessed only by the
user who configures the tracing operation.
Match—Specify a regular expression (regex) to be matched in the
trace operation output.
Copyright © 2010, Juniper Networks, Inc.