Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 40

24
Table 18: Interfaces Configuration Fields (continued)
Option
Input Traffic Control Profile
Input Traffic Control Profile
Remaining
Output Traffic Control Profile
Output Traffic Control Profile
Remaining
Function
Applies an input traffic
scheduling and shaping profile
to the logical interface.
Applies an input traffic
scheduling and shaping profile
for remaining traffic to the
logical interface.
Applies an output traffic
scheduling and shaping profile
to the logical interface.
Applies an output traffic
scheduling and shaping profile
for remaining traffic to the
logical interface.
Copyright © 2010, Juniper Networks, Inc.
Your Action
1. Click the New button or
select an interface and
click the Edit button in
Interface.
2. Expand the Interface tree
and select Input Traffic
Control Profile.
3. Specify the comment and
the profile name.
4. Click Ok.
1. Click the New button or
select an interface and
click the Edit button in
Interface.
2. Expand the Interface tree
and select Input Traffic
Control Profile Remaining.
3. Specify a comment and a
profile name.
4. Click Ok.
1. Click the New button or
select an interface and
click the Edit button in
Interface.
2. Expand the Interface tree
and select Output Traffic
Control Profile.
3. Specify a comment and a
profile name.
4. Click Ok.
1. Click the New button or
select an interface and
click the Edit button in
Interface.
2. Expand the Interface tree
and select Output Traffic
Control Profile Remaining.
3. Specify a comment and a
profile name.
4. Click Ok.