Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 49

Table 21: Assigning Forwarding Classes to Output Queues
Task
Configure a scheduler map for
DiffServ CoS.
Configure a best-effort forwarding
class and scheduler.
Configure an expedited forwarding
class and scheduler.
Configure an assured forwarding
class and scheduler.
Copyright © 2010, Juniper Networks, Inc.
Click the Configuration tab. In the configuration tree expand Class of Service.
3.
Select Scheduler Maps.
4.
Add or modify settings as specified in Table 21 on page 33.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See the Network
and Security Manager Administration Guide for more information.
Action
1. Click Add new entry.
2. In the Name box, type the name of the scheduler map—for example,
diffserv-cos-map.
1. Select Forwarding Class and click Add new entry.
2. In the Name box, type the name of the previously configured best-effort forwarding
class—for example, be-class.
3. Select the previously configured best-effort scheduler—for example, be-scheduler.
4. Click OK.
1. Select Forwarding Class and click Add new entry.
2. In the Name box, type the name of the previously configured expedited forwarding
class—for example, ef-class.
3. Select the previously configured expedited forwarding scheduler—for example,
ef-scheduler.
4. Click OK.
1. Select Forwarding Class and click Add new entry.
2. In the Name box, type the name of the previously configured assured forwarding
class—for example, af-class.
3. Select the previously configured assured forwarding scheduler—for example,
af-scheduler.
4. Click .
OK
Chapter 3: Configuring Class of Service
33