Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 61

Table 28: Create a New Term (continued)
Dot 1q User Priority
DSCP Number
VLAN
TTL Value
Packet Length
Action
Counter Name
Copyright © 2010, Juniper Networks, Inc.
Specifies the user-priority field of the
tagged Ethernet packet. User-priority
values can be 0–7.
In place of the numeric value, you can
specify one of the following text
synonyms (the field values are also
listed)
background (1)—Background
best-effort (0)—Best effort
controlled-load (4)—Controlled load
excellent-load (3)—Excellent load
network-control (7)—Network control
reserved traffic
standard (2)—Standard or Spare
video (5)—Video
voice (6)—Voice
NOTE: This option is not applicable for
a Routing filter.
Specifies the Differentiated Services
code point (DSCP). The DiffServ protocol
uses the type-of-service (ToS) byte in
the IP header. The most significant six
bits of this byte form the DSCP.
Specifies the VLAN to be associated.
NOTE: This option is not applicable for
a Routing filter.
Specifies the time-to-live value.
NOTE: This option is applicable for a
Routing filter.
Specifies the length of the packet.
NOTE: This option is applicable for a
Routing filter.
Specifies the count of the number of
packets that pass this filter, term, or
policer.
Chapter 5: Configuring Firewall Filters
Enter a number or the corresponding text
synonym.
Select the DSCP number from the list.
Enter the VLAN name
Enter a value.
Enter a value.
Enter a value.
45