Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 167

Table 86: Virtual Chassis Configuration Fields
Field Function
Member Details
Name Specifies the identifier for the member switch. The
master switch assigns member IDs.
Mastership Priority Specifies the mastership priority to be assigned to the
member.
Role Specifies the role to be assigned to the member.
Serial Number Specifies the serial number of the member.
No Management If you want to reserve an individual member's
VLAN management Ethernet port for local troubleshooting,
you can remove that port from being part of the Virtual
Management Ethernet (VME).
Refresh Refreshes the operational status of virtual chassis
members.
Copyright © 2010, Juniper Networks, Inc.
Chapter 12: Configuring a Virtual Chassis
Your Action
Select an identifier from the list. Select an
ID from through .
0 9
Select a number from through
1
255 being the highest priority (
default).
Select the appropriate role.
Enter the serial number.
Click to disable management VLAN on the
port.
Click to refresh the operational status.
, with
255
is the
128
151