Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 42

26
Table 18: Interfaces Configuration Fields (continued)
Option
Excess Bandwidth Share
Input Excess Bandwidth Share
Input Traffic Control Profile
Function
Sets the excess bandwidth
sharing value.
Sets the excess input
bandwidth sharing value.
Applies an input traffic
scheduling and shaping profile
to the logical interface.
Copyright © 2010, Juniper Networks, Inc.
Your Action
1. Expand the Interfaces tree
and select Interface Set.
2. Click the New button or
select an interface set and
click the Edit button.
3. Expand interface—set tree
and select Excess
Bandwidth Share .
4. Specify the comment and
proportion.
5. Click Ok.
1. Expand the Interfaces tree
and select Interface Set.
2. Click the New button or
select an interface set and
click the Edit button.
3. Expand interface—set tree
and select Input Excess
Bandwidth Share .
4. Specify the comment and
proportion.
5. Click Ok.
1. Expand the Interfaces tree
and select Interface Set.
2. Click the New button or
select an interface set and
click the Edit button.
3. Expand interface—set tree
and select Input Traffic
.
Control Profile
4. Specify the comment and
profile name.
5. Click Ok.