Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 86

Table 43: Rib Fields
Option
Name
Comment
Aggregate
Generate
Martians
Maximum Paths
Maximum Prefixes
70
Function
Specifies the unique name for the routing
table.
Specifies the comment for the route
resolution.
Enables you to configure the aggregate
routes for the routing table. Aggregation
allows you to combine groups of routes
with common addresses into a single
entry in the routing table. This decreases
the size of the routing table as well as
the number of route advertisements sent
by the router.
Enables you to configure generated
routes, which are used as routes of last
resort in the routing table.
Enables you to configure martian
addresses in the routing table.
Enables you to configure a limit for the
number of routes installed in a routing
table.
Enables you to configure a limit for the
number of routes installed in a routing
table.
Your Action
1. Expand the
Routing Options
select .
Rib
2. Click the New button or select a
routing table and click the Edit
button.
3. Enter the name for the routing table.
1. Expand the Routing Options
select Rib .
2. Click the New button or select a
routing table and click the Edit
button.
3. Enter the comment for the routing
table.
1. Expand the tree and select
Rib
.
Aggregate
2. Select the global aggregate route
options in and individual
Defaults
aggregate route options in
1. Expand the Rib tree and select
.
Generate
2. Select the default route to the
destination address in
Defaults
individually generated route options
in .
Route
1. Expand the Rib tree and select
Martian .
2. Enter the martian addresses.
1. Expand the tree and select
Rib
Maximum Paths .
2. Enter the
Maximum Paths
.
Threshold
1. Expand the Rib tree and select
Maximum Prefixes .
2. Set up the
Maximum Prefixes
.
Threshold
Copyright © 2010, Juniper Networks, Inc.
tree and
tree and
.
Route
and
and the
and the