Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 39

Copyright © 2010, Juniper Networks, Inc.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See the Network
and Security Manager Administration Guide for more information.
Table 18: Interfaces Configuration Fields
Option
Interface
Name
Comment
Scheduler Map
Scheduler Map Chassis
Chapter 3: Configuring Class of Service
Function
Specifies the interface name.
Specifies the comment for the
interface.
Specifies the scheduler
configuration mapped to the
forwarding class.
Specifies the scheduler
configuration mapped to the
forwarding class for the
particular chassis in the
chassis queue.
Your Action
1. Expand the Interfaces tree
and select Interface.
2. Click the New button or
select an interface and
click the Edit button in
Interface.
3. Enter the interface name
in the Name box.
1. Expand the Interfaces tree
and select Interface.
2. Click the New button or
select an interface and
click the Edit button in
Interface.
3. Enter the comment for the
interface in the Comment
box.
1. Expand the Interfaces tree
and select Interface.
2. Click the New button or
select an interface and
click the Edit button in
Interface.
3. Select the scheduler map
from the list.
1. Expand the Interfaces tree
and select Interface.
2. Click the New button or
select an interface and
click the Edit button in
Interface.
3. Select the scheduler map
chassis from the list.
23