Configuring Snmp Communities (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual

Table 81: Configuring SNMP View Fields
Option
Name
Oid
Name
Include or Exclude
Related
Documentation

Configuring SNMP Communities (NSM Procedure)

140
Enter the parameters as specified in Table 81 on page 140.
7.
Click one:
8.
OK—To save the changes.
Cancel—To cancel the modifications.
Apply—To apply the SNMP settings.
Function
Specifies a name for the view.
Specifies an OID used to represent a
subtree of MIB objects.
Specifies the MIB for the view.
Specifies whether the view includes or
excludes the set of MIB objects.
Configuring Basic System Identification for SNMP (NSM Procedure) on page 117
Configuring SNMP Communities (NSM Procedure) on page 140
Configuring SNMP Trap Groups (NSM Procedure) on page 144
You can configure an SNMP community to authorize access to the SNMP server by SNMP
clients, based on the source IP address of incoming SNMP request packets. A community
also defines which MIB objects are available and the operations (read-only or read-write)
allowed on those objects. The SNMP client application specifies an SNMP community
name in Get, GetNext, GetBulk, and Set SNMP requests. If a community is not configured,
all SNMP requests are denied.
To configure SNMP communities in NSM:
In the navigation tree, select
1.
In the list, double-click the device to select it.
2. Devices
Click the
Configuration
3.
Your Action
Enter a name for the view.
1.
2. Click the New button or select an OID
Enter the OID of the MIB in either
dotted-integer format or subtree-name
format.
Select exclude to exclude the subtree of
MIB objects represented by the specified
OID.
Select include to include the subtree of
MIB objects represented by the specified
OID.
Device Manager > Devices
tab.
Expand the View tree and select oid.
and click the Edit button.
.
Copyright © 2010, Juniper Networks, Inc.