Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 46

Related
Documentation
30
Table 19: Configuring and Applying Rewrite Rules (continued)
Configure assured forwarding class rewrite
rules.
Apply rewrite rules to an interface.
Configuring CoS Classifiers (NSM Procedure) on page 15
Configuring CoS Code Point Aliases (NSM Procedure) on page 17
Configuring CoS Drop Profile (NSM Procedure) on page 19
Configuring CoS Forwarding Classes (NSM Procedure) on page 21
Configuring CoS Interfaces (NSM Procedure) on page 22
Configuring CoS Schedulers (NSM Procedure) on page 31
Configuring CoS and Applying Scheduler Maps (NSM Procedure) on page 32
1. Click Add new entry next to Forwarding
class.
2. In the Class name box, type the name of the
previously configured expedited forwarding
class—for example, af-class.
3. Click Add new entry next to Loss priority.
4. From the Loss val list, select low.
5. In the Code point box, type the value of the
low-priority code point for assured
forwarding traffic—for example, 001010.
6. Click OK.
7. Click Add new entry next to Loss priority.
8. From the Loss val list, select high.
9. In the Code point box, type the value of the
high-priority code point for assured
forwarding traffic—for example, 001100.
10. Click OK twice.
1. Click Add new entry next to Interfaces.
2. In the Interface name box, type the name of
the interface—for example, ge-0/0/0.
3. Click Add new entry next to Unit.
4. In the Unit number box, type the logical
interface unit number—for example, 0.
5. Click Configure next to Rewrite rules.
6. In the Rewrite rules name box, under Dscp,
type the name of the previously configured
rewrite rules—for example, rewrite-dscps.
7. Click OK.
Copyright © 2010, Juniper Networks, Inc.