Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 84

Table 42: Rib Group Fields
Option
Name
Comment
Export Rib
Import Policy
68
Cancel—To cancel the modifications.
Apply—To apply the routing option settings.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See the Updating
Devices section in the Network and Security Manager Administration Guide for
more information.
Function
Specifies the unique name for the routing
table group.
Specifies the comment for the rorouting
table group.
Specifies the routing table from which
the JUNOS software exports routing
information.
Enables you to apply one or more
policies to routes imported into the
routing table group.
Your Action
1. Expand the
Routing Options
select .
Rib Group
2. Click the New button or select a
routing table group and click the Edit
button.
3. Enter the name for the routing table
group.
1. Expand the
Routing Options
select Rib Group .
2. Click the New button or select a
routing table group and click the Edit
button.
3. Enter the comment for the routing
table group.
1. Expand the Routing Options
select .
Rib Group
2. Click the New button or select a
routing table group and click the Edit
button.
3. Enter the name of the routing table.
1. Expand the tree and select
rib-group
.
Import Policy
2. Set up the import policies for the
routing table group.
Copyright © 2010, Juniper Networks, Inc.
tree and
tree and
tree and