Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 57

Table 27: VoIP Configuration Fields
Option
Name
Comment
VLAN
Forwarding Class
Copyright © 2010, Juniper Networks, Inc.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See Updating
Devices for more information.
Function
Specifies the interface name.
Specifies the comment for the interface
to which the VoIP is assigned.
Specifies the VLAN to be assigned to the
interface.
Specifies the forwarding class to which
the interface is assigned.
Chapter 4: Configuring Ethernet Switching Options
Your Action
1. Click the New button or select an
interface and click on Edit button in
.
Interface
2. Enter the interface name in the
box or select from the list.
1. Click the New button or select an
interface and click on Edit button in
Interface .
2. Enter the comment in the
box.
1. Click the New button or select an
interface and click on Edit button in
.
Interface
2. Enter the VLAN address in the
box.
1. Click the New button or select an
interface and click on Edit button in
Interface .
2. Enter the forwarding class in the
Forwarding Class box.
Name
Comment
VLAN
41