Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 142

Table 77: Configuring Rmon Fields
Option
Comment
126
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See the Updating
Devices section in the Network and Security Manager Administration Guide for
more information.
Function Your Action
Specifies the comment Enter the comment.
for the RMON
configuration.
Copyright © 2010, Juniper Networks, Inc.