Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 138

Table 74: Configuring Interface Fields
Option
Interface
Related
Documentation
122
In the navigation tree, select Device Manager > Devices.
1.
In the Devices list, double-click the device to select it.
2.
Click the Configuration tab.
3.
In the configuration tree, expand SNMP.
4.
Select Interface.
5.
Enter the parameters as specified in Table 74 on page 122.
6.
Click one:
7.
OK—To save the changes.
Cancel—To cancel the modifications.
Apply—To apply the SNMP settings.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See the Updating
Devices section in the Network and Security Manager Administration Guide for
more information.
Function
Specifies the name for the specific
interface configuration.
Configuring SNMP Communities (NSM Procedure) on page 140
Your Action
1. Click the New button or select an
interface and click the Edit button.
2. Enter the names of one or more
logical interfaces.
Copyright © 2010, Juniper Networks, Inc.