Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 36

Table 16: Drop Profile Configuration Fields (continued)
Option
Name
Comment
Fill Level
Name
Comment
Related
Documentation
20
Function
Specifies the drop profile name.
Specifies the comment for the drop
profile.
Specifies the fill level for the drop profile.
Specifies the comment for the fill level
Configuring CoS Classifiers (NSM Procedure) on page 15
Configuring CoS Code Point Aliases (NSM Procedure) on page 17
Configuring CoS Forwarding Classes (NSM Procedure) on page 21
Configuring CoS Interfaces (NSM Procedure) on page 22
Configuring CoS Rewrite Rules (NSM Procedure) on page 28
Configuring CoS Schedulers (NSM Procedure) on page 31
Configuring CoS and Applying Scheduler Maps (NSM Procedure) on page 32
Your Action
1. Click the New button or Edit button
in the Drop Profile interface.
2. Enter the drop profile name in the
Name box.
1. Click the New button or Edit button
in the Drop Profile interface.
2. Enter the comment for the drop
profile in the Comment box.
1. On Drop Profile interface click the
New button or select a profile and
click the Edit button.
2. Expand the Drop Profile tree and
select Fill Level.
3. Click the New button or select a fill
level and click the Edit button.
4. Select a value from Name list.
1. On the Drop Profile interface click the
New button or select a profile and
click the Edit button.
2. Expand the Drop Profile tree and
select Fill Level.
3. Click the New button or select a fill
level and click the Edit button.
4. Enter a comment in the Comment
box.
Copyright © 2010, Juniper Networks, Inc.