Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 129

Table 69: VRRP Configuration Fields
Field
VRRP
Comment
Startup Silent Period
Traceoptions
Copyright © 2010, Juniper Networks, Inc.
Function
Specifies comment for VRRP.
Enables the system to ignore the Master
Down Event when an interface
transitions from the disabled state to the
enabled state. It avoids an incorrect error
alarm caused by delay or interruption of
incoming VRRP advertisement packets
during the interface startup phase.
Enables you to configure VRRP level
tracing options.
Chapter 8: Configuring Protocols
Your Action
1. Expand the Protocol tree and select
.
VRRP
2. Enter the comment.
1. Expand the Protocol tree and select
VRRP .
2. Enter the startup silent period or
select from the list
1. Expand the Protocol tree.
2. Select VRRP and expand the tree.
3. Select .
Traceoptions
4. Set up the file and flag parameters.
113