Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 106

Table 56: BGP Configuration Fields (continued)
Field
Advertise
Import
Family
Authentication Settings
Export
Local As
Graceful Restart
90
Function
Enables you to specify whether BGP
should advertise the best route even if
the routing table did not select it to be
an active route.
Enables you to apply one or more routing
policies to routes being imported into
the JUNOS routing table from BGP .
Enables you to configure protocol family
information for the logical interface.
Enables you to specify the
authentication settings for BGP.
Enables you to apply one or more routing
policies to routes being exported from
the JUNOS routing table from BGP .
Enables you to configure BGP with a
different local autonomous session (AS)
number for each BGP session
Enables you to specify the graceful
restart parameters.
Your Action
1. Expand the tree.
Protocol
2. Select and select
BGP Advertise
3. Specify whether Advertise has to be
inactivated and set up the Advertise
Peer As.
1. Expand the Protocol tree.
2. Select and select
BGP Import
3. Specify the export policies configured
on the peer.
1. Expand the tree.
Protocol
2. Select BGP and select Family
3. Specify the Family and Inet
parameters.
4. Expand the tree and set up the
Inet
parameters.
1. Expand the tree.
Protocol
2. Select BGP and select Authentication
Settings tab.
3. Specify the authentication key,
algorithm and key chain.
1. Expand the tree.
Protocol
2. Select BGP and select Export
3. Specify the export policies configured
on the peer.
1. Expand the tree.
Protocol
2. Select and select
BGP Local As
3. Enter the comment, as number, loop
and specify whether it is private.
1. Expand the Protocol tree.
2. Select and select
BGP Graceful
tab.
Restart
3. Specify the graceful restart
parameters.
Copyright © 2010, Juniper Networks, Inc.
tab.
tab.
tab.
tab.
tab.