Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual page 152

Table 79: Configuring V3 Fields (continued)
Option Function
Vacm Specifies the VACM
information.
Related
Documentation
136
Your Action
1. Expand the V3 tree and select Vacm.
2. Configure the following to create and define an entry:
Comment—Enter a comment for this VACM set.
Access—Assign the security name to a group of SNMP security names
that belong to the same an SNMP access policy and define the access
privileges for this group. Users belonging to a particular SNMP group
inherit all access privileges granted to that group. Specify a context
prefix for this group or a default context prefix for all VACM entries by
configuring the context security model and entering a comment for
the context security model.
Specify this group's security model:
Specify this group's security level:
Designate the level of security view access.
Security To Group—Configure the group to which a specific security
name belongs. Assign the security name to a group of SNMP security
names that belong to the same SNMP access policy and define the
access privileges for this group. Users belonging to a particular SNMP
group inherit all access privileges granted to that group.
Specify this group's security model:
Configuring SNMP Trap Groups (NSM Procedure) on page 144
Any
usm —SNMPv3 security model
v1—SNMPv1 message process model
v2c—SNMPv2c message process model
authentication—Provides authentication but no encryption.
none—No authentication and no encryption.
privacy—Provides authentication and encryption.
Read View—Provides read access.
Write View—Provides write access.
Notify View—Provides notify access, in which a list of notifications
is sent to each user in this group.
usm —SNMPv3 security model.
v1—SNMPv1 message process model
v2c—SNMPv2c message process model.
Copyright © 2010, Juniper Networks, Inc.