Configuring Instance Import (Nsm Procedure); Configuring Confederation (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual

Configuring Instance Import (NSM Procedure)

Configuring Confederation (NSM Procedure)

84
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See the Updating
Devices section in the Network and Security Manager Administration Guide for
more information.
You can apply one or more policies to routes being imported into a routing instance.
To configure instance import in NSM:
In the navigation tree, select
1.
In the list, double click the device to select it.
2. Devices
Click the Configuration
3.
In the configuration tree, expand
4.
Select Instance Import and specify the import policies to be applied to the routes that
5.
are imported to a routing instance.
Click one:
6.
OK—To save the changes.
Cancel—To cancel the modifications.
Apply—To apply the routing option settings.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See the Updating
Devices section in the Network and Security Manager Administration Guide for
more information.
Grouping autonomous systems (ASs) into confederations reduces the number of BGP
connections required to interconnect ASs. If you administer multiple ASs that contain
many BGP systems, you can group them into one or more confederations. Each
confederation is identified by its own AS number, which is called a confederation AS
number. To external ASs, a confederation appears to be a single AS. Thus, the internal
topology of the ASs (members) making up the confederation is hidden. Because each
confederation is treated as if it were a single AS, you can apply the same routing policy
to all the ASs that make up the confederation.
To configure a confederation in NSM:
Device Manager > Devices
tab.
.
Routing Options
.
Copyright © 2010, Juniper Networks, Inc.