Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - MULTICAST ROUTING CONFIGURATION GUIDE 2010-10-07 Configuration Manual page 97

show ip igmp-proxy groups
show ip igmp-proxy interface
Copyright © 2010, Juniper Networks, Inc.
See show ip igmp-proxy.
Use to display information about multicast groups that IGMP proxy reported.
Field descriptions
Grp Address—Address of the multicast group
Interface—Type and specifier of the upstream interface associated with the multicast
group
Member State—State of the associated group address and interface
Idle—Interface is going to send a group membership report to respond to a group
membership query for this group
Delay—Interface has responded to the latest group membership query for this
group
count—Total number of multicast groups associated with this interface
Example 1
host1#show ip igmp-proxy groups
Grp Address Interface
--------------- --------------- --------------
225.1.1.1 atm3/0.2
225.1.1.2 atm3/0.2
225.1.1.3 atm3/0.2
225.1.1.4 atm3/0.2
225.1.1.5 atm3/0.2
225.1.1.6 atm3/0.2
count 6
Example 2
host1#show ip igmp-proxy group 225.1.1.1
Grp Address Interface
--------------- --------------- --------------
225.1.1.1 atm3/0.2
Example 3
host1#show ip igmp-proxy group count
Count: 6 groups
See show ip igmp-proxy groups.
Use to display information about the interface on which you configured IGMP proxy.
To view information about a particular interface, enter an interface type and specifier,
such as atm 3/0. For details about interface types and specifiers, see Interface Types
and Specifiers in JunosE Command Reference Guide.
Specify the brief keyword to display a summary rather than a detailed description.
Chapter 2: Configuring IGMP
Member State
Idle
Idle
Idle
Idle
Idle
Idle
Member State
Idle
75