Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - MULTICAST ROUTING CONFIGURATION GUIDE 2010-10-07 Configuration Manual page 225

ff0e::70 fe80::90:1a02:1640:91
40::10
40::11
ff0e::80 2/0
50::10
fe80::90:1a02:1650:910
50::11
fe80::90:1a02:1650:920
fe80::90:1a02:1650:910
50::12 fe80::90:1a02:1650:920
ff0e::90 0/3
*
fe80::90:1a02:1660:910
fe80::90:1a02:1660:920
fe80::90:1a02:1660:930
show ipv6 mld oif-mapping
show ipv6 mld ssm-mapping
Copyright © 2010, Juniper Networks, Inc.
stop
01:10
01.24
stop
02:48
02:56
02:48
02:56
02:56
02:48
02:56
02:48
See show ipv6 mld membership.
Use to display the mapped OIF to be assigned to a given map-name, group address,
and source address.
Field descriptions
OIF-MAP Name—Name of the map requested
Group Address—Multicast group IP address requested
Source Address—Source IP address requested
Mapped OIF—Join interface associated with the OIF map
Example
host1#show ipv6 mld oif-mapping OIFMAP ff3e::1 10::10
OIF Mapping
OIF-MAP Name
Group Address
Source Address : 10::10
Mapped OIF
See show ipv6 mld oif-mapping.
Use to display the SSM mapping state and the source list mapping associated with a
multicast group address.
Field descriptions
SSM Mapping—Status of SSM mapping on the interface (enabled or disabled)
Group Address—Multicast group address requested
Source List—List of sources mapped to the multicast group address
Example
host1:boston#show ipv6 mld ssm-mapping ff3e::1
SSM Mapping : Enabled
Chapter 6: Configuring Multicast Listener Discovery
3 FastEthernet2/4
3T FastEthernet2/5
2T FastEthernet2/6
: OIFMAP
: ff3e::1
: ATM5/0.120
203