Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - MULTICAST ROUTING CONFIGURATION GUIDE 2010-10-07 Configuration Manual page 223

host1# show ipv6 mld mapped-oif
OIF Oper Group Address
--------------- ---- --------------- --------------- --------------- ----------
ATM5/0.120 Up ff3e::2
ATM5/0.121 Up ff3e::1
ff3e::2
Counts: 3 source-group mappings
show ipv6 mld oif-map
show ipv6 mld membership
Copyright © 2010, Juniper Networks, Inc.
Map Name—Name of the map associated to the OIF
Counts—Number of source-group mappings to OIFs
Example
Source Address
10::10
*
10::11
See show ipv6 mld mapped-oif.
Use to display all outgoing interface (OIF) maps or the OIF map for the specified map
name.
Field descriptions
Map Name—Name of the map associated to the show output
Group Prefix—Multicast group IPv6 prefix
Source Prefix—Source IPv6 prefix
OIF—Outgoing interface associated with the group and source prefix
Example
host1#show ipv6 mld oif-map
Map Name
------------------ ------------------ ------------------ ------------------
OIFMAP
See show ipv6 mld oif-map.
Use to display MLD membership information for multicast groups and (S, G) channels.
Specify the brief keyword to see a summary of the information.
Chapter 6: Configuring Multicast Listener Discovery
Join I/F Map Name
ATM5/0.12 OIFMAP
ATM5/0.13 OIFMAP
ATM5/0.12 OIFMAP
ATM5/0.13 OIFMAP
ATM5/0.12 OIFMAP
ATM5/0.13 OIFMAP
Group Prefix Source Prefix
ff3e::/112 ::/0
ff3e::/112 10::2/128
ff3e::/112 10::10/128
ff3e::3/128 ::/0
ff3e::4/128 ::/0
OIF
ATM5/0.121
self
ATM5/0.120
ATM5/0.130
ATM5/0.130
201