Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - MULTICAST ROUTING CONFIGURATION GUIDE 2010-10-07 Configuration Manual page 196

JunosE 11.3.x Multicast Routing Configuration Guide
show ipv6 mroute summary
show ipv6 multicast protocols
174
Forwarded : 346 pkts, 22144 bytes
Rcvd on OIF: 0 pkts
See show ipv6 mroute.
Use to display a summary of all or specified multicast routes.
Specify a multicast group IP address or both a multicast group IP address and a
multicast source IP address to display information about a particular multicast
forwarding entry.
Field descriptions
Group Address—IP address of the multicast group
Source Address—IP address of the multicast source
RPF Route—IP address and network mask of the RPF route
RPF Iif—Type and identifier for the incoming interface for the RPF route
#Oifs—Number of outgoing interfaces
Counts—Numbers of types of (S,G) mappings
(S,G)—Number of (S,G) entries
(* ,G)—Number of (* ,G) entries
Example
host1#show ipv6 mroute summary
IPv6 Multicast Routing Table
Group Address Source Address
--------------- --------------- ------------------ --------------- -----
ff0e::1 10:0:0:1:1::
ff0e::1 10:0:0:1:2::
ff0e::1 10:0:0:1:3::
ff0e::1 10:0:0:1:4::
ff0e::1 10:0:0:1:5::
ff0e::1 10:0:0:1:6::
ff0e::1 10:0:0:1:7::
ff0e::1 10:0:0:1:8::
ff0e::1 10:0:0:1:9::
ff0e::1 10:0:0:1:a::
ff0e::1 10:0:0:1:b::
ff0e::1 10:0:0:1:c::
ff0e::1 10:0:0:1:d::
ff0e::1 10:0:0:1:e::
ff0e::1 10:0:0:1:f::
Counts: 16 (S, G) entries
0 (*, G) entries
See show ipv6 mroute.
RPF route RPF Iif
10:0:0:1::/64 ATM2/3.1001
10:0:0:1::/64 ATM2/3.1001
10:0:0:1::/64 ATM2/3.1001
10:0:0:1::/64 ATM2/3.1001
10:0:0:1::/64 ATM2/3.1001
10:0:0:1::/64 ATM2/3.1001
10:0:0:1::/64 ATM2/3.1001
10:0:0:1::/64 ATM2/3.1001
10:0:0:1::/64 ATM2/3.1001
10:0:0:1::/64 ATM2/3.1001
10:0:0:1::/64 ATM2/3.1001
10:0:0:1::/64 ATM2/3.1001
10:0:0:1::/64 ATM2/3.1001
10:0:0:1::/64 ATM2/3.1001
10:0:0:1::/64 ATM2/3.1001
Copyright © 2010, Juniper Networks, Inc.
#Oifs
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1