Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - MULTICAST ROUTING CONFIGURATION GUIDE 2010-10-07 Configuration Manual page 230

JunosE 11.3.x Multicast Routing Configuration Guide
show ipv6 mld-proxy interface
208
Grp Address—Address of the multicast group
Interface—Type and identifier of the upstream interface associated with the multicast
group
Grp Mode
Blank—No sources included or excluded for this group
Include—Sources included for this group
Exclude—Sources excluded for this group
Count—Total number of multicast groups associated with this interface
Example 1
host1#show ipv6 mld-proxy groups
Grp Address Interface
--------------- --------------- --------------
ff0e::1 ATM5/1.200
ff0e::2 ATM5/1.200
ff0e::3 ATM5/1.200
2001::1
ff0e::4 ATM5/1.200
ff0e::5 ATM5/1.200
2001::2
Counts: 3 <*,G>, 1 Exclude (1 sources), 1 Include (1 sources)
(5 total)
Example 2
host1#show ipv6 mld-proxy groups ff0e::1
Grp Address Interface
--------------- --------------- --------------
ff0e::1 ATM5/1.200
Counts: 1 <*,G>
(1 total)
Example 3
host1#show ipv6 mld-proxy groups count
Counts: 3 <*,G>, 1 Exclude (1 sources), 1 Include (1 sources)
(5 total)
See show ipv6 mld-proxy groups.
Use to display information about the interface on which you configured MLD proxy.
To view information about a particular interface, enter an interface type and specifier,
such as atm 3/0. For details about interface types and specifiers, see Interface Types
and Specifiers in JunosE Command Reference Guide.
Specify the brief option to display a summary rather than a detailed description.
Field descriptions
Grp Mode
Include(1):
Exclude(1):
Grp Mode
Copyright © 2010, Juniper Networks, Inc.