Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - MULTICAST ROUTING CONFIGURATION GUIDE 2010-10-07 Configuration Manual page 161

show ip dvmrp route
Copyright © 2010, Juniper Networks, Inc.
atm5/0.14
atm5/0.15
See show ip dvmrp neighbor.
Use to display information about DVMRP routes.
Specify an IP address to display the best route to that address.
Specify an IP address and subnet mask to display the route that exactly matches this
IP address and subnet mask
Specify an interface type and specifier to display routes associated with that interface.
For details about interface types and specifiers, see Interface Types and Specifiers in
JunosE Command Reference Guide.
Specify the brief keyword to view a summary of information.
Field descriptions
Prefix—IP address of the network
Length—Length of the subnet mask for the network
usNbr/Owner—IP address of the upstream neighbor associated with this route or a
description of the origin of the route
Dvmrp Local—Route is associated with a directly attached network
Dvmrp Aggregate—Route is an aggregate route determined by summarization
Metric—Metric associated with this interface for this route
ExpireTime—Time, in seconds, until the VR starts the process for removing the route
UpTime—Length of time, in seconds, that the route has been in the DVMRP routing
table
Interface—Type and specifier for the interface, such as atm3/0.
Example 1
host1:boston>show ip dvmrp route
Prefix/Length
14.0.0.0/8
Downstream Interface(s)
Interface
atm5/0.15
15.0.0.0/8
Downstream Interface(s)
None
25.0.0.0/8
Downstream Interface(s)
14.0.0.1 32
15.0.0.1 34
usNbr/Owner Metric ExpireTime UpTime Interface
Dvmrp Local 1
Dvmrp Local 1
14.0.0.1 2
Chapter 4: Configuring DVMRP
3 255 PGMN Active
3 255 PGMN Active
Never 18 atm5/0.14
Never 18 atm5/0.15
129 11 atm5/0.14
139