Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - MULTICAST ROUTING CONFIGURATION GUIDE 2010-10-07 Configuration Manual page 219

host1:boston# show ipv6 mld groups
Grp Address
------------------- ---------------------- -------- --------------- ------ ------
ff3e::1 ATM5/0.12
oif-map OIFMAP ATM5/0.
121
ff3e::1 ATM5/0.13
oif-map OIFMAP ATM5/0.
121
ff3e::2 ATM5/0.12
Included Sources:
10::2 oif-map OIFMAP self
10::10 oif-map OIFMAP ATM5/0.
120
10::11 oif-map OIFMAP ATM5/0.
121
ff3e::2 ATM5/0.13
Included Sources:
10::2 oif-map OIFMAP self
10::10 oif-map OIFMAP ATM5/0.
120
10::11 oif-map OIFMAP ATM5/0.
121
Counts: 4 version-2, 0 version-1, 0 check state, 0 disabled
(4 total)
0 excluded
Source-groups: 6 included, 0 excluded
show ipv6 mld interface
Copyright © 2010, Juniper Networks, Inc.
Example 2—With OIF mapping
Interface State
Version2 fe80::f7:0:91a: 377
Version2 fe80::f7:0:a1a: 369
Version2 fe80::f7:0:91a: 370
Version2 fe80::f7:0:a1a: 373
See show ipv6 mld groups.
Use to display MLD information for interfaces on which you enabled MLD.
Specify the brief keyword to see a summary of the information.
Specify the count keyword to see the number of MLD interfaces.
Field descriptions
Interface—Type of interface and interface specifier. For details about interface types
and specifiers, see Interface Types and Specifiers in JunosE Command Reference
Guide.
address—IPv6 link-local address of the interface
Administrative state—Status of the interface in the software: enabled or disabled
Operational state—Physical status of the interface: enabled or disabled
Version—MLD version
State—Function of the interface: querier or nonquerier
Chapter 6: Configuring Multicast Listener Discovery
Reporter ExpTim oldHTo
0
0
0
0
0
0
370
370
370
0
0
373
373
373
197