Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - MULTICAST ROUTING CONFIGURATION GUIDE 2010-10-07 Configuration Manual page 98

JunosE 11.3.x Multicast Routing Configuration Guide
76
Field descriptions
Interface—Type of upstream interface. For details about interface types, see Interface
Types and Specifiers in JunosE Command Reference Guide.
address—Address of upstream interface
Administrative state—State of upstream interface in the software: enabled or disabled
Operational state—Physical state of upstream interface: enabled or disabled
Version—IGMP version on this interface
State—Presence of IGMPv1 routers on the same subnet as this upstream interface
Unsolicited report interval—Time interval, in tenths of a second, at which this
upstream interface sends an unsolicited group membership report
Version 1 router present timeout—How long, in seconds, that the upstream interface
calculates an IGMPv1 router to exist on the subnet after that interface receives an
IGMPv1 group membership query
multicast group—Number of multicast groups associated with this upstream interface
Interface statistics Rcvd—Statistics for messages received on this interface
v1 queries—Number of IGMPv1 group membership queries received
v2 queries—Number of IGMPv2 group membership queries received
v1 reports—Number of IGMPv1 group membership reports received
v2 reports—Number of IGMPv2 group membership reports received
Interface statistics Sent—Statistics for messages sent from this interface
v1 reports—Number of IGMPv1 leave group reports sent
v2 reports—Number of IGMPv2 leave group reports sent
leaves—Number of leave group membership messages sent
Example
host1#show ip igmp-proxy interface atm 3/0.2
Interface atm3/0.2 address 21.1.1.1/255.0.0.0
Administrative state enabled, Operational state enabled
Interface parameters:
Version 2
State No v1 Router Present
Unsolicited report interval 10 secs
Version 1 router present timeout 400 secs
0 multicast group
Interface statistics:
Rcvd: 0 v1 query, 6 v2 queries
Copyright © 2010, Juniper Networks, Inc.