Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - MULTICAST ROUTING CONFIGURATION GUIDE 2010-10-07 Configuration Manual page 194

JunosE 11.3.x Multicast Routing Configuration Guide
show ipv6 mroute count
show ipv6 mroute statistics
172
Port—Slot/port value on the router
Limit—None (reserved for future functionality)
Count—Number of mroute outgoing interfaces on the specified port
BW bps—Bandwidth limit (in bits per second)
Admitted—Bandwidth admitted on the port (in bits per second)
Example
host1#show mroute port count
BW Priority
Port Limit Count
----- ----- -----
1/1/0 None 1
1/1/1 None 2
See show mroute port count.
Use to display information about the number of groups and sources.
Specify a multicast group address or both a multicast group address and a multicast
source address to display information about a particular multicast forwarding entry.
Field descriptions
Counts—Number of types of source group mappings
(S,G)—Number of (S,G) entries
(* ,G)—Number of (* ,G) entries
Example
host1#show ipv6 mroute count
IPv6 Multicast Routing Table
Counts: 2000 (S, G) entries
0 (*, G) entries
See show ipv6 mroute.
Use to display statistics for packets received through multicast routes that the router
has added to the multicast routing table and established on the appropriate line
modules.
Specify a multicast group IPv6 address or both a multicast group IPv6 address and a
multicast source IPv6 address to display information about a particular multicast
forwarding entry.
Field descriptions
bps BW bps Hysteresis
----- -------- ----------
None None 85
15000 10000 85
Copyright © 2010, Juniper Networks, Inc.
Admitted
--------
0
2000