Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - MULTICAST ROUTING CONFIGURATION GUIDE 2010-10-07 Configuration Manual page 159

show ip dvmrp mroute
show ip dvmrp neighbor
Copyright © 2010, Juniper Networks, Inc.
metric-offset in:
metric-offset out:
announce-filter:
accept-filter(s)
Example 2
host1:boston#show ip dvmrp interface brief
Interface
atm5/0.14
atm5/0.15
See show ip dvmrp interface.
Use to display information about DVMRP routes to multicast groups.
Field descriptions
(S,G) pair—Source, Group pair value
Uptime—Time, in seconds, that this (S, G) pair entry has been in the routing table
Upstream Prune—Whether the router has sent prune messages for this group
RPF Interface—Interface that provides the shortest path back to the source
Outgoing interface list—Types and specifiers of interfaces through which the VR
forwards DVMRP messages, such as atm3/0. For details about interface types and
specifiers, see Interface Types and Specifiers in JunosE Command Reference Guide.
Example
host1:boston#show ip dvmrp mroute
IP DVMRP Multicast Routing Table
(40.0.0.0/16, 228.1.1.1)
Upstream Prune: none
RPF Interface
atm5/0.40
Outgoing interface list:
atm5/0.31
See show ip dvmrp mroute.
Use to display information about DVMRP neighbors.
Specify the brief keyword to view a summary of information.
Field descriptions
Neighbor Address/NbrAddress—IP address of the neighbor
Interface—Interface type and specifier, such as atm3/0. For details about interface
types and specifiers, see Interface Types and Specifiers in JunosE Command Reference
Guide.
None Configured
SourceAddress Network/Mask
14.0.1.1 14.0.1.1/8
15.0.1.1 15.0.1.1/8
Uptime: 77
Chapter 4: Configuring DVMRP
1
0
None
RBdPk RBdRt SntRt
0 0 2
0 0 2
137