Heading - Simrad SX90 - REFERENCE MANUAL REV D Reference Manual

Simrad SX90
134

Heading

The parameter dialog opens when you click the
Heading
(Heading) button in the
of the menus.
The read-out of the current heading is a repetition of the
connected course gyro input. Manual heading input may be used
if signals from the external heading sensors are missing.
Note
This heading read-out must not be used for navigation.
The following options are available in the
dialog:
• + (plus): Click to increase the manual heading with 1 degree.
• – (minus): Click to decrease the manual heading with 1
degree.
• : Click to allow manual heading. Use this option only
Manual
if the ship's heading sensor is unavailable.
• : Click to use automatic heading information from the
Auto
ship's heading sensor.
• : Click to close the parameter dialog.
Close
• : Click to access the on-line help.
Help
Related topics
Setup menu on page 89
parameter dialog at the bottom
Status
Heading
Hdg
parameter
307670/D