Middle Pos - Simrad SX90 - REFERENCE MANUAL REV D Reference Manual

307670/D

Middle Pos

The parameter dialog opens when you click the
Middle Pos
button in the
Middle Pos
Provided that the hull unit installed on your vessel supports the
function, this parameter dialog allows you to define a "middle"
vertical position for the transducer array. Such a position may for
example be the position where the transducer array is located
immediately below the trunk.
The following options are available in the
dialog:
• + (plus): Click to increase the vertical position.
• – (minus): Click to decrease the vertical position.
• : Click to close the parameter dialog.
Close
• : Click to access the on-line help.
Help
Related topics
Transducer on page 172
parameter dialog.
Transducer
Middle Pos
Parameters
parameter
139