Simrad SX90 - REFERENCE MANUAL REV D Reference Manual page 176

Simrad SX90
174
Advanced features
• : Select the hull unit position.
Hull Unit Position
•
IP and MAC addresses
access the network addresses for the Beamformer Unit. This
feature is intended for software debugging and maintenance.
Do not use!
• : This button opens a separate dialog to access a
Transceivers
list of the available transceivers. This feature is intended for
software debugging and maintenance. Do not use!
• : This text field displays the progress using text
Debug
messages. It is provided for debugging purposes. This feature
is intended for software debugging and maintenance. Do not
use!
• : This text field displays errors using text messages. It
Errors
is provided for debugging purposes. This feature is intended
for software debugging and maintenance.
•
BeamFormers OFF
beamformer functions. This feature is intended for software
debugging and maintenance. Do not use!
•
TRX Powers ON/OFF
the power supplies in the Transceiver Unit. This feature is
intended for software debugging and maintenance. Do not
use!
These advanced features are not intended for users. If you
attempt to change any of the settings provided, your sonar may
become unserviceable.
Related topics
• System Test menu on page 95
• Power on/off procedures on page 34
: This button opens a separate dialog to
: Click this button to switch off the
: Click this button to switch on and off
307670/D