How To Investigate Marker And Symbol Information; How To Delete A Marker Or Symbol - Simrad SX90 - REFERENCE MANUAL REV D Reference Manual

Simrad SX90
44
How to investigate marker and symbol
information
Observe the following procedure to read the information related
to each marker or symbol.
Procedure
1 Click the
Objects
Observe that all the current objects (markers and symbols)
2
are listed.
• The menu is shown in all display modes, and
Objects
displays the range (R), bearing (B) and depth (D) to all
selected objects.
• The identification (ID) abbreviations for the different
objects are:
– AT: Automatic target track marker
– Ci: Circle marker
– M: Target marker
– OS: Own Ship marker
– PT: Position track marker
– F: Radio buoy marker
• The number behind the ID abbreviation refers to the
same number on the object in the sonar presentation. The
"P" after the Automatic target track marker indicates the
priority level where the audio channel is locked to the
target.
• When you select a
or a
marker Radio buoy marker
line from the vessel to the marker will be shown.
To retrieve the information about an object, click the object
3
abbreviation in the list.
4 Observe that a dedicated parameter dialog with all known
object information appears at the bottom of the menu.

How to delete a marker or symbol

Observe the following procedures to delete a marker or object
from the sonar presentation.
Procedure
1 Click the
Objects
2 Click on the object that you wish to delete.
Click the
3
Delete
tab to open the menu.
,
Target marker
in the list, a dotted bearing
tab to open the menu.
button at the bottom of the list.
Automatic target track
307670/D