Verticalview Menu - Simrad SX90 - REFERENCE MANUAL REV D Reference Manual

Simrad SX90
102

VerticalView menu

Menu description
Menu buttons
• : Click this button to zoom in on the vertical view
Zoom
around the trawl symbol or the bottom. To zoom in on the
bottom, an external echo sounder must be connected to the
sonar. (► Zoom on page 181)
• : Use this button to define the zoom scale around
Zoom Scale
the Trawl symbol or the bottom. (► Zoom Scale on page 182)
• : This button is used to select the bearing source of
Data Source
the vertical views. If you select
follow the trainable audio channel. If you select
bearing of the vertical slice can be adjusted independent of the
audio channel. (► Data Source on page 120)
•
Direction Indicator
vertical slices independent of the audio channel. The direction
indicator is shown in the horizontal presentation as a yellow
dotted line. (► Direction Indicator on page 124)
The menu is activated by
VerticalView
pressing the button on the Operating
View
Panel (or the middle mouse button)
while positioning the cursor in any of the
vertical views, and then selecting
in the pop-up.
menu View
This menu provides control of selected
parameters related to the current data
displayed in the vertical view.
• The button closes this menu.
Close
• The button opens the on-line
Help
help.
Note
The
Direction Indicator
when is selected in the
Indicator
parameter dialog.
Source
, the vertical slice will
Audio
: This feature allows you to train the
View
is only available
Data
, the
Indicator
307670/D