Default Setting - Simrad SX90 - REFERENCE MANUAL REV D Reference Manual

Parameters

Default Setting

The parameter dialog opens when you click the
Default Setting
button in the menu.
Default Setting Setup
This function makes it possible to delete all the parameters
currently saved in the sonar's memory, and reinstall those
defined by Simrad instead; the factory default settings. These
default settings are identified with an asterisk in the different
parameter dialogs and menus, and will perform well under
normal conditions.
Options
: Click to load default settings. Note that the settings take
OK
effect immediately, and the sonar will automatically switch to the
Bow up display mode.
: Click to cancel the operation. The parameter dialog will
Cancel
close, and no default settings will be loaded.
Related topics
Setup menu on page 89
123
307670/D