Display Modes; Choosing A Display Mode - Simrad SX90 - REFERENCE MANUAL REV D Reference Manual

Simrad SX90

DISPLAY MODES

Choosing a display mode

58
This chapter describes the Simrad SX90 display modes. The
various modes represent the graphical presentation of sonar data.
Several display modes are available to present the best possible
presentations as well as flexible choices for a large range of user
applications.
Note
The descriptive order of the display modes in this chapter has
been chosen only to simplify the descriptions. In operational
conditions, the order depends on the selected gear. This is
because different initial display modes are used for easy selection
by the four buttons on the Operating Panel. The order of
Mode
these display modes can easily be changed in the
Topics
• Choosing a display mode on page 58
• Bow up on page 60
• Bow up/Audio on page 61
• Bow up/Vertical on page 62
• Bow up/Dual Vertical on page 63
• Bow up/180° Vertical on page 64
• True motion on page 65
• True motion/Vertical on page 66
• North up on page 67
• Dual 1 on page 68
• Dual 2 on page 69
• 270°/Vertical on page 70
Display mode selection is made by clicking the
the top of all menus. The four first display modes shown can also
easily be selected with the four
Panel.
Procedure
1 Locate the
Mode
Press one of the four buttons to choose mode.
2
buttons on the Operating
Mode
field on your Operating Panel
menu.
Sort Mode
button on
Mode
307670/D