About The Parameter Dialogs - Simrad SX90 - REFERENCE MANUAL REV D Reference Manual

About the parameter dialogs

307670/D
When a parameter is selected, the available choices are shown in
the dialog below the menu. The setting is then made using the
available buttons or lists. Several levels are frequently used to
select the parameters. Note that:
In many cases you will not need to open the parameter
1
dialog, as you can control the settings directly on the menu
button.
2 The parameter is selected and activated by the sonar once
it is highlighted in the dialog. The operational changes can
thus be investigated from within the dialog without closing
it.
3 The button will always close the dialog.
Close
The button will always provide short-form context
4
Help
sensitive help. This help text will appear on top of the
parameter dialog, and you need to click
the help window you can also click
interactive manual. This may not be available in all modes,
as it will block the view of the sonar echoes. Once the
interactive manual has been accessed, you need to click
one more time to reduce the large help window back to the
short-form presentation. If you click
window, the same large window will automatically appear
next time you click
The menu settings marked with an asterisk, indicate the normal
setting which perform well under normal conditions. If one got
lost in the menu settings, a Default Settings function will bring
up these normal settings. After experience, when the contents of
the menus are better known, the increase/decrease function on
the actual menu button can be used directly without opening the
parameter dialog.
Close
Free
Close
in a parameter dialog.
Help
Parameters
to return. In
to access to full
Free
in the large help
109