How To Add A Target Tracking Line; User Setting Procedures; How To Save The Current User Setting - Simrad SX90 - REFERENCE MANUAL REV D Reference Manual

User setting procedures

307670/D

How to add a target tracking line

Observe this procedure to add a tracking line to a tracked target
to indicate its movement history.
Procedure
Choose an operational mode with a horizontal presentation.
1
2 Place the cursor in the horizontal presentation.
Press the button in the
3
View
Panel.
Observe that a short-cut menu appears on the display.
4
5 Click
View Menu
6 Click the
Target track
7 Observe that the
the menu.
8 Choose the length of the tracking line, and click
This section explains how to handle user and default settings
on the SX90 sonar.

How to save the current user setting

Observe the following procedure to save the current user settings.
Procedure
1 Click the tab to open the menu.
Setup
2 Click the
User setting
Click the
3
Save current setting
The current setting is saved with the default identification
name.
Operational procedures
field on the Operating
Cursor
, and observe that the
button on the
GeoView
parameter dialog opens below
Target track
button to open the parameter dialog.
button.
menu opens.
GeoView
menu.
to exit.
Close
53