View Menus - Simrad SX90 - REFERENCE MANUAL REV D Reference Manual

Simrad SX90

View menus

100
Basic parameters
These menu choices provide the same functions as their
respective buttons on the Operating Panel.
• Target Track
• Position Track
• Set Marker
• New Own Ship Marker
• Circle Marker
• Gear Symbol
For more information about the
buttons on the Operating panel, see 'Train' field on page 77. For
more information about the four
field on page 73.
Additional parameters
The following additional functions are provided by the
pop-up menu.
• : When this function is selected, a straight line is
New Ruler
drawn from the current cursor position (where the
pop-up menu was selected) to another selected position. The
ruler will display range and bearing between the two points.
To remove the ruler, click on it with the right mouse button,
and select
Remove Ruler
(► Ruler on page 154)
• : Removes a ruler from the display.
Remove Ruler
• : If you click on an existing ruler, the
Inspect Ruler
parameter dialog will appear under the menu. This dialog
provides information about the selected ruler, and it allows
you to remove the ruler with a
Object on page 135)
• : When this function is selected, the object will
Delete [object]
be removed. This is the same function as provided by the
menu.
Objects
•
Make [object] Priority Target
give priority to an "old" target tracking symbol, which locks
the audio channel on the target.
The view menus are activated from the
again is accessed using the
or the middle mouse button. The view menus are shown with
vertical tabs on the right hand side, and the menus can easily be
closed using the
Close
menus have access to on-line help through a
Target Track
buttons, see 'Symbol'
Marker
from the
Object
button. (► Inspect
Delete
: This function can be used to
View
button on the Operating Panel
View
button in the lower part of each menu. All
and
Position Track
Object
Object
pop-up menu.
Ruler
pop-up menu, which
button.
Help
307670/D