Target Track - Simrad SX90 - REFERENCE MANUAL REV D Reference Manual

307670/D

Target Track

The parameter dialog opens when you click the
Target Track
button in the
Target Track
is in turn activated by pressing the
Panel (or the middle mouse button) in any horizontal view, and
then selecting
View menu
Target track lines show the movement history of targets as a line
after the respective symbols. They are shown as straight line
segments drawn between each position fix, with optional minute
markers to be added for each minute along the line. You can
switch the track line(s) off, or enable them for the priority target
only (P), or for all targets.
Options
: Click to remove all target track lines.
None
: Click to enable a target track line on the priority target.
[x] min.P
A minute marker is placed every [x] minutes.
: Click to enable a target track line on all targets.
[x] min.All
Minute markers are placed every [x] minutes.
: Click to close the parameter dialog.
Close
: Click to access the on-line help.
Help
Related topics
GeoView menu on page 101
menu. The
GeoView
button on the Operating
View
in the pop-up menu.
View
Parameters
menu
GeoView
167