Copying
Setting Copy Options
In CentreWare Internet Services, click Properties>Services.
1.
2.
Click Copy>Setup.
3.
Under Output Color, select the color mode that the printer uses for copies. If you select Single Color,
under Single Color, select the color.
To require users to select the output color at the control panel, under Color Presets Screen, select On.
This setting allows you to conserve supplies. For example, when Auto Detect is on, the printer
detects color in an original document that is almost entirely black and white. This setting prevents
you from accidentally copying in color when you intend to copy in black and white.
4.
Select an option.
1->1 Sided: Scans only one side of the originals and produces 1-sided copies.
−
−
1->2 Sided: Scans only one side of the originals and produces 2-sided copies.
2->2 Sided: Scans both sides of the originals and produces 2-sided copies. To rotate the second
−
side, select Rotate Side 2.
2->1 Sided: Scans both sides of the originals and produces 1-sided copies.
−
Click Apply.
5.
Note:
Not all options listed are supported on all printers. Some options apply only to specific printer
models or configurations.
Specifying Default Copy Settings at the Control Panel
1.
At the printer control panel, press the Machine Status button, then touch the Tools tab.
Touch Service Settings.
2.
3.
Touch Copy Service.
Touch Feature Defaults.
4.
5.
Configure as needed.
Touch Save Defaults.
6.
148
Xerox
WorkCentre
®
System Administrator Guide
6655 Color Multifunction Printer
®