Cable, Port, And Pinout Information; Pin Connections For The 10/100/1000 Ethernet Interface - Dell PowerConnect 6024 User Manual

Cable, Port, and Pinout Information

This section describes the switch's physical interfaces and provides information about cable
connections.
Stations are connected to the switch's ports through the physical interface ports on the front panel.
For each station, the appropriate mode (Half/Full Duplex, Auto) is set.

Pin Connections for the 10/100/1000 Ethernet Interface

The switching port can connect to stations wired in standard RJ-45 Ethernet station mode using
straight cables. Transmission devices connected to each other use crossed cables.
Figure 3-1 illustrates the RJ-45 pins, and Table 3-1 contains the RJ-45 pin allocations.
Figure 3-1. RJ-45 Connector
Table 3-1. RJ-45 Pin Connections for 10/100/1000 Base T
Pin Use
1 TxRx 1+
2 TxRx 1-
3 TxRx 2+
Cable, Port, and Pinout Information
45