Dell PowerConnect 6024 User Manual page 368

Figure 8-23. DVMRP Interface
The DVMRP Interface page contains the following fields divided into two areas:
STATIC ROUTE
Interface — Specifies the interface number on which DVMRP is enabled.
IP Address (X.X.X.X) — Specifies the source IP address of the port on which DVMRP is enabled.
Network Mask (X.X.X.X) — Specifies the subnetwork mask of the source IP address.
Prefix Length /XX) — Specifies the number of bits that comprise the source IP prefix or the
network mask of the source IP address.
DVMRP INTERFACE SETTING
IP Interface — Specifies the interface number on which DVMRP is enabled.
IP Address — Indicates the source IP address of the port on which DVMRP is enabled.
DVMRP Metric (1-31) — Indicates the distance used to calculate distance vector. The DVMRP
metric is the interface distance between the router originating the report and the source network.
The default value is 1.
Remove — When checked, removes a DVMRP interface.
Adding a New DVMRP Interface
1
Open the DVMRP Interface page.
378
Configuring Routing