Dell PowerConnect 6024 User Manual page 444

5
Select either And or Or from the Match drop-down menu if both the IP ACL and
MAC ACL check boxes are selected.
6
Click Apply Changes.
The class map is created, and the device is updated.
Editing a Class Map
1
Open the QoS Class Map page.
2
Select a class map from the Class-Map Name drop-down menu.
3
Edit the remaining fields on the page as desired.
4
Click Apply Changes.
5
The class map is edited, and the device is updated.
Deleting a Class Map
1
Open the QoS Class Map page.
2
Select a class map from the Class-Map Name drop-down menu.
3
Check the Remove check box.
4
Click Apply Changes.
The class map is deleted, and the device is updated.
Displaying the Class Map Table
1
Open the QoS Class Map page.
2
Click Show All to display the Class Map Table page.
Defining QoS Class Maps Using the CLI Commands
Table 10-13. QoS Class Maps CLI Commands
CLI Command
class-map class-map-
name [match-all |
match-any]
match access-group acl-
name
show class-map [ class-
map-name ]
The following is an example of the CLI commands:
console(config)# class-map class1 match-all
454
Configuring Quality of Service
Description
Creates a class map and enters class map
configuration mode.
Defines the match criterion to classify traffic;
active only under class map configuration
mode.
Displays all the class maps.